Call Us : +91 -  9810333175
Home | Contact Us
 
HOME ABOUT US PRODUCTS CONTACT US ENQUIRY
We Produce a wide range of Cables required in different categories. Some of our Products are as follows .
>> Computer Networking Cable / LAN Cable / CAT 5
>> Telephone Cables
>> Power Cables
>> Control Cables
>> Flexible Cables to IS:694
>> CCTV Cables   
Technical Specification Accepted >>GO
Products
Telephone Cables

Armoured & Unarmoured to ITI/DOT specifications. Unarmoured cables is suitable for use in Indoor Permanent Installations, Telephone Exchanges & Communication Equipments situated in tropical and non-tropical locations.Armoured Cables due to its mechanical strength is suitable for Outdoor & Indoor places .

PVC Sheathed Switchboard Cables.
Conductor
Solid annealed plain or copper wire
Insulation
Hard grade PVC with nominal radial thickness according to table.
Twinning
Two, Three or Four insulated conductors are uniformly twisted together.
Stranding
The pairs, triples or quads are stranded in concentric layers and the Cable core is wrapped with PVC / Polyester tape. An aluminium myler may be wrapped over the stranding pairs, triples or quads if ordered for screening purpose.
Rip Cord
A non-metallic suitable ripcord shall be laid-up longitudinally under the sheath.
Sheath
PVC / Thickness as related specifications.
Application
These type of Switch Board Unarmoured cables is suitable for use in Indoor permanent installations, telephone exchanges, and communication equipment suited in both tropical and non-tropical Locations.
PVC Insulated PVC Sheathed Armoured Telephone Cables.
Conductor
Solid annealed plain or copper wire
Insulation
Hard grade PVC with nominal radial thickness according to table.
Twinning
Two, Three or Four insulated conductors are uniformly twisted together.
Stranding
The pairs, triples or quads are stranded in concentric layers and the Cable core is wrapped with PVC / Polyester tape. An aluminium myler may be wrapped over the stranding pairs, triples or quads if ordered for screening purpose.
Sheath
PVC / Thickness as related specifications.
Armouring
A Covering of Steel round / flat wire over the sheathing applied, as per IS: 1554 / Pt.I / 88 .
Overall Sheath
A heavy PVC sheath applied over the armouring, thickness as per IS: 1554 / Pt.I / 88.
Application
These type of Armoured cables are for Underground purposes due to their mechanical strength, suitable for indoor or outdoor places, for Telephone Exchanges and communication equipment situated in both Tropical and Non-Tropical locations.
Core Dimensions and Resistance as Per I.T.D. Spn. S/WS - 114 - C.
Type
Nominal Dia of Conductor(mm)
Maximum Resistance at 20° C (ohms/km)

Radial thickness of PVC Insulation (mm)

Maximum Dia of Insulated conductor (mm)
A.
0.50
91.00
0.20 + 0.05 or -0.02
1.00
B.
0.60
57.00
0.25 + 0.05 or -0.02
1.24
C.
0.71
45.70
0.28 + 0.05 or -0.02
1.37
D.
0.90
28.45
0.33 + 0.05 or -0.02
1.66
E.
1.12
18.64
0.41 + 0.05 or -0.02
2.04
Electrical Data ( Conductor )
Conductor Diameter
Maximum Conductor Resistance at 20° C.
Minimum Elongation.
0.50 mm
92.2 Ohms/km.
15 %
0.60 mm
64.0 Ohms/km.
15 %
0.71 mm (+/- 0.0127 mm)
45.7 Ohms/km.
20 %
Electrical Data ( Insulation )
Insulation Resistance
Insulation Resistance of finished cables 5 M.ohms/km at 50° C between two insulated conductors.
Spark Test Voltage 3000 Volts ( RMS )
High Voltage Test
3 kV DC or 2 kV RMS between each conductor and remaining conductors bunched and earthed.
Packing & Delivery
The Switch board cables will be delivered in 100 Mtrs length or as ordered. And the armoured cables will be delivered in 500/1000 or as ordered.
 
Armoured Telecommunication cables to ITD-113C (G/WIR-06/02, May94), Armouring to IS:1554 (Part.I) 1988.
No of Pairs
Conductor Diameter (mm)
Overall Dia of Finished Cable.(mm)
Approximate weight of Cables(kg/km)
Conductor Diameter (mm)
Overall Dia of Finished Cables. (mm)
Approximate Weight of Cables. (kg/km)
Standard Drum Length. (m)
1
0.50
9.20
171.000
0.60
9.50
185
1000
2
0.50
10.00
197.000
0.60
10.40
216
1000
3
0.50
10.75
235.000
0.60
10.80
266
1000
4
0.50
11.20
258.000
0.60
11.35
292
1000
5
0.50
12.00
308.000
0.60
12.50
354
1000
10
0.50
13.30
400.000
0.60
14.00
441
1000
15
0.50
14.80
485.000
0.60
15.00
513
1000
20
0.50
16.30
572.000
0.60
16.50
588
1000
25
0.50
17.20
645.000
0.60
17.70
694
500
30
0.50
18.20
710.000
0.60
19.00
785
500
35
0.50
19.10
766.000
0.60
18.50
715
500
40
0.50
18.60
775.000
0.60
19.90
810
500
50
0.50
21.10
840.000
0.60
21.80
960
500
75
0.50
24.40
1100.000
0.60
26.00
1325
500
100
0.50
28.50
1405.000
0.60
29.60
1650
500
200
0.50
37.50
2375.000
0.60
41.10
2900
250
Armoured Telecommunication cables to ITD-114B, Armouring as per IS:1554 (Part.I) 1554/1988.
No of Pairs
Conductor Diameter (mm)
Overall Dia of Finished Cable(mm)
Approximate weight of Cables(kg/km)
Conductor Diameter (mm)
Overall Dia of Finished Cables. (mm)
Approximate Weight of Cables. (kg/km)
Standard Drum Length. (m)
1
0.70
10.00
222
0.90
10.70
258
500
2
0.70
10.75
254
0.90
11.40
293
500
3
0.70
11.50
320
0.90
12.00
329
500
4
0.70
12.40
345
0.90
15.30
475
500
5
0.70
14.30
430
0.90
16.10
530
500
6
0.70
14.70
455
0.90
16.30
550
500
7
0.70
15.00
485
0.90
16.65
585
500
8
0.70
15.60
510
0.90
16.95
615
500
10
0.70
16.50
580
0.90
17.70
675
500
15
0.70
17.65
670
0.90
20.00
725
500
20
0.70
18.75
680
0.90
21.60
910
500
25
0.70
20.00
815
0.90
22.75
1038
500
30
0.70
21.50
885
0.90
24.75
1205
500
35
0.70
23.00
1000
0.90
26.15
1345
500
40
0.70
24.70
1130
0.90
-
-
-
50
0.70
26.50
1290
0.90
32.00
1885
500
75
0.70
32.10
1800
0.90
38.00
2535
250
100
0.70
35.60
2230
0.90
42.70
3215
250
Website Designed & Hosted by EasyTech